Fall arrest system on Hot Deck roof

SecuRope cable lifeline system on hot deck roof

Working at height legislation EN795:2012 Type C | CEN/TS16415:2013


A Hot Deck consists of a corrugated sheet covered by an insulating material and a membrane. The Multipost and SpotAnchor are designed for hot deck roofs. High resistance toggle bolts enable the fixation on corrugated metal sheets, wooden panels or precast concrete. Only the toggle bolts passes through the isolation, then thermal bridges are minimized. The roofing collar, in bitumen or PVC-P, is prefitted in the factory to guarantee the waterproofness. Easier to retrofit on existing buildings.


  • Up to 4 users
  • Freehand system
  • Undeformable
  • Energy absorbing
  • Can be retrofitted
  • Reinforced toggle bolt
  • Compatible with all bituminous membranes
  • Compatible with PVC-P membranes
  • Compatible with TPO, FPO, EPDM after verification by engineer
  • Compatible with Securope 2012, Securail and Securail Pro


  • Fall arrest 
  • Fall restraint
  • Maintenance of industrial roofs
  • Maintenance of residential roofs
  • Maintenance of commercial office and mall roofs

SecuRope NEO lifeline system on hot deck roof

Energy absorber LDV032 with constant tension mechanism for fragile structures
NEO anchor LDV043 with energy absorption by shear pin breaking
Multipost fitted with bituminous collar IDF022
Corner plate for angle between 45° to 140° LDV015
Cable Ø 8 mm LDV006
Crimping ring 30mm LDV011 to held the curve in place
Spotanchor M12 with Bituminous collar LDV091
End anchor LDV002
Line Tensioner LDV137
SecuRope NEO lifeline system on hot deck roof

SpotAnchor fixing assembly and NEO Anchor on Multipost

The SpotAnchor is fixed by a reinforced toggle bolt FAS005. This allows a distribution of forces on a large surface. 

For modern constructions with wooden panels, the SecuRope lifeline is installed on MultiPost with 4 toggle bolts.

IDF022 and LDV043

NEO Anchor on fixing assembly hot deck
NEO Anchor on hot deck fixing assembly